Trim virtually any type of resin with our heated blade technology
The model MTM 2025 and MTM 2225 spin trimmers are designed to trim “log” containers. These very high speed trimmers can handle over 300 containers per minute. Two pulley variable speed drive system with “V” guide timing belt allows for excellent control of the containers during the trimming process with no slippage on the drive pulleys. The stainless steel infeed chutes enable proper bottle spacing and positive feeding. Standard features include: Jam and incorrect trim detection system with light tower and audible alarm. Some of the common and popular options include:
- Remote Control Box – Allows access to controls on either side of conveyor
- Upright
Download Product Sheet
2025 Features & Benefits
| Heated Blade Technology |
Trim virtually any type of resin, including PETG, barrier resins, K resins, PVC, PP, PE; multi layer resins respond especially well. |
| New Redesigned Blade Holder |
Allows the blade to nest at the correct angle without a lengthy setup period. Reduced blade changeover time. |
| New Redesigned Blade Holder Adjustment |
Designed to keep left hand and right hand blades in perfect alignment from the log centerline. Reduces changeover times and provides greater consistency. |
| Heavy Duty 1/3 hp Drive with DC Variable Speed Controller |
Long life and greater consistency in throughput. Allows various line speeds to be run on a single trimmer. |
| New Two Pulley Drive System with “V” Guide Timing Belt |
Allows for better control of containers during the trimming process with no slippage on the drive pulleys. |
| Simplified Belt Tensioning |
Allows for quick changeovers increasing productivity. Reduces chance for operator error during procedure. |
| PLC Controls with Panel Mounted User Interface |
Reduces setup time and functions as a fault message panel. |
| Jams and Incorrect Trim Detection |
Reduces down time and eliminates incorrectly trimmed containers. |
| Stainless Steel Infeed Chute with Bottle Metering |
Proper bottle spacing and positive feed. |
| Audible Alarm and Beacon Lights for Detection Devices |
Faster response time from plant staff. Higher production. |
2025 Specifications
Dimensions
| Width |
40″ |
| Length |
72″ |
| Height |
89″ |
| Weight |
700 lbs |
| Vertical Height Range |
44″ ±3″
Height from floor to blade |
Utility Requirement
| Electrical Supply |
| Voltage |
120 VAC |
| Amperage |
15 AMP |
| Compressed Air Supply |
| Line Size |
1/4″ Pipe |
| Pressure |
80-100 psi |
Motor Ratings
| Trimmer Drive Motor |
1/3 hp |
| Heater Blade Temperature |
450°F (Max) |
Container Range
| Containers per Minute |
300 (depending on size) |
| Min/Max Neck Size |
1.5″ – 7″ 25-127 mm |
| Min/Max Diameter |
1″-4″ 38-178 mm |
| Min/Max Height |
3″-18″ 76-450 mm |
Specifications are subject to change without notice. Guards are supplied and must be in place before operation. All sales are subject to our prevailing terms and conditions of sale. Other options available upon request.
