Plastic Surface Treater for Three Dimensional Plastic Parts Requiring No Orientation

When orientation of your parts is not required, the Bulk LectroTreat surface treating system is the solution. The parts can be either bulk fed or randomly placed onto the treating conveyor. With the Bulk LectroTreat there is no lost time for any set up changes for different sizes, or shapes of parts. As long as the part fits within the treating tunnel, the entire outside surface of the part is treated evenly insuring adhesion.

Download Product Sheet
Bulk LectroTreat

Bulk LectroTreat Features & Benefits

Surface Treatment Levels
Surface Treatment Levels

Surface Treatment Levels >70 dynes/cm over the entire outside of three dimensional plastic parts. Allows the decoration/adhesion on plastic parts without the use of costly primers or chemical wipes.

No Heat

Zero scrap due to heat warping, surface crazing, stress relieving and paneling. Maintains the surface integrity of your plastic parts. Thin walling of parts made possible resulting in material savings.


No set-up required for
different shapes resulting in
labor and production savings

Continual Process
Open Atmosphere Plasma

Continual process, no vacuum
required, higher production rates

Safe Equipment

Lower insurance premiums,
no open flames

Efficient Operation
with Low

Low cost power construction;
Only periodic cleaning necessary

Low Frequency
Low Frequency 50-60HZ

No interference with Electronic/PLC/Computers controls

PLC Controls

Reliable and repeatable production rates, allows interface with entire production line

Cold Plasma

360 degree uniform surface
treatment guaranteed

Bulk LectroTreat Specifications

Input Voltage

Standard 240 volt, 3 phase Any voltage can be accommodated



Total Electrical Load

Not to exceed 8 KVA on standard units


UL, CSA or CE components

Equipment Dimensions

Standard 43.5″ above floor
Other heights are available

Conveyor Heights

37″ above the floor

Complete Systems

Standard unit includes surface treating, conveyor and exhaust systems

Custom Design

Available upon request

Specifications are subject to change without notice. Guards are supplied and must be in place before operation. All sales are subject to our prevailing terms and conditions of sale. Other options available upon request.